As time progresses, your personal items will become infested with contaminants. Especially firearms which can explode if not thoroughly cleaned. That's why it's important to invest in a quality ultrasonic cleaner.
Ultrasonic cleaners are fast and efficient at cleaning out unwanted toxins from your items. While you can clean your parts manually, it will take hours to achieve the acquired result. Having an ultrasonic cleaner saves you time and cleans your belongings faster than if it was done by hand.
In this short review, we'll discuss the pros and cons associated with this machine. Also, we'll give extra information in our buying advice section in order to help you make your decision. By the end of this article, you'll have enough confidence to know if this ultrasonic cleaner is worth your money.
The Hornady Sonic Cleaner ll is a top-tier item in today's market. This ultrasonic cleaner combines a unique cleaning solution and a powerful cleaning process to provide an efficient method to help the removal of carbon and other firearm contaminants.
The Hornady Sonic Cleaner II can be used to clean all of your brassware, bullets, and other parts of your gun that need a good cleaning. It's versatile enough to be used for small household objects such as dinner utensils and other kitchen items. You'll like this cleaner if you need something reliable when dealing with basic cleaning tasks.
One thing that makes this product special is its removal of the primer pockets of your gun cases. Primer pockets are hard to clean out by hand as the dirt is tucked deeply beneath the surface. However, the Hornady can clean these areas with ease in under 15 minutes.
Even if the gun parts aren't completely clean after the first cycle, the residue is weakened enough to be wiped off. We suggest running at least 2-3 cleaning cycles to remove toxins from your parts fully. The dirt will be removed, and your parts will look as good as new.
The tank's internal size is about 7.25 x 6 x 3 inches in volume. This is almost double the width of as others in the market and has a market capacity of 2 liters. The process is assisted by an 80-watt heater which helps remove dirt quickly and enhance the cleaning operation.
Another advantage lies in the machine's cleaning cycle time. It runs a bit faster than lighter models, and it ranges from 5 to 30 minutes. Get this product if you need a timer that assists you during your cleaning duties.
Despite having a very efficient system with lots of great features and instructions, the Hornady's frame is fragile. It's constructed out of plastic, which might prove a problem if you're looking for a sturdy ultrasonic cleaner.
Overall, we think that the Hornady is a great choice if you need a high-capacity, heavy-duty cleaner. It's priced at $91, making it affordable for those wanting an ultrasonic cleaner that performs at a professional level.
Before you buy the ultrasonic cleaner, here are some things you should take into consideration.
Even though most ultrasonic applications are cleaned via water, you need some form of soap additive for all of the contaminants hidden inside of your items.
Because of this, you need to get the right cleaning solvent or solution from your manufacturer. Make sure that the cleaning solution is recommended for the machine you're currently using. Alternatively, you can get soaps made to remove the filter and oils from the bath.
You'll want to make sure you have the best frequency for your cleaning applications. For about 95% of your applications, you'll need a frequency that goes about 45 kHz.
But, there are rare occasions where you'll need to clean the sub-microns out of your electronics. You'll need a cleaner that runs at a speed of 68 kHz or higher for more intricate cleaning situations.
Remember, tank size matters when you are deciding on your next ultrasonic cleaner. Don't buy a tank that cannot handle the amount of parts (per load) you're placing onto your unit. Also, avoid units that are smaller than your most significant item.
If you think that the unit is small before you make a purchase, chances are it will be too small once you start using it. You won't see the benefits of ultrasonic cleaning because you'll have to place more parts and run through multiple cleaning cycles to see a change.
Having a timer makes the cleaning process easier. They are simple to use and completely shut off the machine once the specified time is complete. Most ultrasonic cleaners have timers that range from 5-15 minutes.
Like we've stated in our review, the Hornady is great because of its expansive timer. For instance, it's maximum time setting is at 30 minutes. This ensures that you can purify your gun parts without the use of multiple cleaning cycles.
A heather is a great way to enhance your cleaning process. It makes the cleaning operations more effective by using the heat to burn off the contaminants on your items. Heat is great for removing oil and grease from your items and should be considered when buying your first cleaner.
Luckily, the Hornady features an 80-watt heater. This gives it enough power to remove bacteria, viruses, and oil that builds up on your gun parts. Because of the heater, it makes it easier to clean your accessories within a short time frame.
Getting the right ultrasonic cleaner can be an extensive process. But, the Hornady Sonic Cleaner II offers enough power and performance to clean your gun parts at a satisfactory level. In addition, it has the speed to cleanse your gun accessories within 10 minutes fully.
Have you ever experienced using the Hornady?
Drop a comment below and let us know what you think!